EPO2000X Boosting rated power and phase mode selectable
The single phase 2kVA is our basic unit.
Used as a master or a booster Up to 3 units of the same type can be linked together. Phase mode selectable(single phase/three phase/single phase three wire) EPO2000X 2 sets : single phase 4kVA, single phase three wire 4kVA EPO2000X 3 sets : single phase 6kVA, three phase 6kVA
Single phase system
EPO2000S
2kVA
2kVA unit
EPO4000S
4kVA
M style cabinet
EPO8000S
8kVA
L style cabinet
EPO10000S
10kVA
L style cabinet
EPO12000S
12kVA
L style cabinet
Phase mode selectable systems (single phase/three phase /single phase three wire)
EPO6000M
6kVA
M style cabinet
EPO12000M
12kVA
L style cabinet
EPO18000M
18kVA
M style cabinet x 3 sets
EPO24000M
24kVA
L style cabinet x 2 sets
EPO36000M
36kVA
L style cabinet x 3 sets
Compact and Light-weight
Only 25kg at 2kVA, Space saving
Light weight : 25kg Compact size : 448(W) x 176(H) x 651(D)mm
System line-up
M style cabinet
L style cabinet
System upgrading, Phase mode selectable
The EPO series is divided into 3 systems according to phase and respond to a variety of uses.
Boosting Rated Power and Phase Mode Selectable Output (single phase/three phase/single phase three wire) with the EPO2000X . The Single phase 2kVA is our basic unit. It can be used as a master or a booster. You can link up to three units of the same model and the EPO2000X allows phase mode selectable output, making it easy to build a 4kVA single phase/single phase three wire system with two units or a 6kVA single phase/three phase system with three units. The EPO2000X is a flexible unit that can accommodate the refabrication common on production lines.
Single Phase Systems This line-up includes 2kVA-12kVA systems. The 4kVA unit comes in M-sized (787.5mm tall) and 8kVA-12kVA units come in L-sized (1,365.5mm tall), all in slim cabinet styles.
Phase Mode Selectable Systems This line-up includes 6kVA-36kVA systems. These products can be used in every mode; single phase, three phase, and single phase three wire. They come loaded with functions not to missed by those who want to use them in various ways as a single power supply. Each system is housed in a sleek, well-organized cabinet.
High efficiency with low input current
76% power efficiency, reducing running costs
Achieves 76% power efficiency. Plus, we've reduced input current to a mere 14A (at 200V) and even further reduced harmonics current. Suppresses futile power consumption and heat generation, and contributes to business cost reductions.
Maximum output peak current
Maximum peak current up to four times of the rated value
The capacitor input type rectifier loads used by many electronic devices tend to consume large current in pulses, as shown in the illustration below. For this reason, you need an AC power supply capable of supplying large current instantaneously. The EPO series can put out up to four times the rated value (rms) maximum peak current.
Stabilization and improvement of waveform
Instantaneous voltage stop
Input voltage waveform distortion
0V, 1 wavelength (20rms),rated load
distortion rate 3.6%, rated load
stable output and low distortion of waveform
The EPO series improves a voltage of various power line environment. And also increases withstanding level of a discontinuance, a distortion and an instantaneous voltage drop of line voltage.
In Rush Current
Current waveform at the start-up of motors
to increase output capacity at the start-up of motors
For each unit's 20 Arms maximum output current, the unit can supply up to 2.8 times 57 Arms (80 Apeak) of in rush current. The EPO series addresses the need for power supplies with large rated output current for handling large loads of in rush current, such as during motor start-up. With the EPO series, you no longer need to put extra money in the budget just for system startups (to increase output capacity).
epo_spec.pdf
